Pneumatic Shut-off Reversing Single Seat Valve And Double Seat Diverter Valve

• Compact and robust design. 3A certified valve.

• Available sizes: from DN25 to DN100.

• Normally closed valve(NC) in the standard version.

• The valve can be changed to normally open (NO) by simply reversing the position of the pneumatic actuator.

• Hygienic design according to 3A standards.

• 360°adjustable body.

• Open lantern allows visual inspection of shaft sealing.

• Easy assembly/disassembly of internal parts by loosening a clamp fastener.

• Standard weld connections (mm or inches).

Materials

• Wetted Parts: AISI 316L, AISI 304

• Other parts: stainless steel 304

• Gasket: EPDM acc. to FDA 177.2600

• Internal surface finish: Ra? 0.8?m

• External surface finish: bright polish

Technical specifications

• Working temperature: -10°C to +120°C(EPDM)/ 14°F ~ 248°F

• +140°C (SIP, max.30min) / 284°F

• Max. working pressure: 10bar 145PSI

• Compressed air pressure: 6-8 bar   87-114PSI

• Air connections: G1/8″ (BSP)

Options

• Available sizes: DN25-DN100  / 1″- 4″

• Gasket: FPM(Vition)(R) in compliance with FDA 177.2600.

• Connections: DIN, Clamp, SMS, RJT, FIL-IDF, etc

• Double-acting pneumatic actuator.

• “Twin-Stop” actuator.

• External position sensors.

• Steam barrier (if shaft sterilization is required).

• Jacketed body.

• C-TOP control unit.

• Surface finish: Ra<0.5um.

• Manual actuation .

• Material certificates.

Sketch of NO and NC Pneumatic Actuator:

pneumatic shut-off single seat valve

* For more information, please contact us.